Master Bathroom Caulking

As a follow-up to last weeks post on caulking, I took some before pictures of our master-bath countertop. This was done with caulking, but it doesn't seem like they used a silicone based product because after 6 months of light use (we actually use the second bathroom more) there is obvious cracking and falling apart of their caulking.

So in between baking cookies and wrapping presents and writing cards all weekend, I took an hour to scrape out all the old caulking and lay down a new clean layer.

Caulking essentials: painter's tape, a caulking
tool (for those of us less adept), paper towels
and of course, the caulking!

I really don't understand how they could have managed to muck it up like they did. They put so much effort into other parts of our house, and then just flubbed it on this one. Here's my entire tool set for re-caulking (except I did forget to include the razor). I found that one of those little razors used to clean glass worked waaaaaay better than the commercial caulk remover I purchased, particularly because it was great to get into all the little nooks and crannies.

And as I mentioned in the last post, extra paper towels is essential for the first time or two.  This time there was definitely a lot less excess caulking and most of it was in the right places, but still handy to have around to wipe off so you don't spread it all over accidentally.

This last pic is the way I taped off the sink to restrict my caulking to as narrow a section as I felt comfortable.  I ran it a bit too narrow last time and had to smooth some areas out after because removing the tape pulled up the edge of the caulking.  So now we've got beautiful caulking to go along with our beautiful countertop!

The Lost Weekend...part 2

One very nice addition Ikea has made recently (at least at our Ikea) is a flat-rate delivery service.  So no matter how much stuff you have, as long as you are within their area, you can get it delivered for $59!  And if you're super lazy...you can just give them a list of the items you want and they'll pull it off the shelves and deliver it for you!

So bright and early sunday morning (two hours before the delivery window was supposed to be) they arrived with our mattress and bedframe. Of course, I was excited as this meant I got to spend a Sunday putting together Ikea furniture; a past-time I rather enjoy.  After moving the old bed, laying out all the pieces, and getting all my tools together, I started work. But about halfway through the construction, I found that one of the pieces didn't fit in the pre-drilled hole no matter how I tried to get it in. After trying for about 15 minutes to smush it in place (square peg - round hole anyone?) I gave up and went back to Ikea to see if it was the wrong part.  They told me that in fact, yes, that piece was from the King set and gave me the right piece. Of course, when I got home it took only about 10 seconds to realize that although now this piece fit in the pre-drilled hole, it did not accomodate the bolt that was supposed to pass through it.  So back to Ikea I went, this time taking the bolts and the piece in question.

This time they saw that the bolt and the piece did not, in fact, go together and asked to make sure we had gotten both boxes from the Queen stack and not one from the King bin. Thankfully Mandy had stayed home this round and confirmed they were both Queen size. So they gave me my hardware back and asked me to bring in the headboard.  Umm....what?  The headboard that put together, is about 4 feet tall by 6 feet wide? that wouldn't fit in my car in the first place so we had it delivered? "Oh, well maybe if we can see the sideboard with the pre-drilled hole."

So off home again. This time I brought pictures of the box labels to show they were the same item boxes 1 and 2 of the Queen, the sideboard, the footboard and all the nuts and bolts. We show up and after about twenty minutes of talking with the guys in the shop, they find the problem.

They have two different suppliers for this one item, and somehow we managed to grab box one from one supplier and box two from the other supplier.  EVEN THOUGH they are supposed to be identical, one of them was making the parts wrong! ARGGGGHHHhhhhh! They're suggestion is to bring the bed back in and pick out another one with the same supplier lot numbers. But of course, now it's almost 3pm and if we want to have the correct bed delivered that day we have to buy it by 3pm. 

Fast forward a few hours; we've had the new bed delivered, put that one together (keeping the old one in case we needed to cannabalize parts) and have the mattress all together. We decided there was still time to return the old bed (trip FOUR to Ikea in one day!) so we just dump everything in the trunk with the seats folded down, drive it back, load it helter skelter on a cart and just wheel the whole mess to customer service.  Thankfully the guy (who wasn't part of any of the previous encounters) just accepted the receipt and refunded the money, because lord knows we weren't going to go through and put everything back in order!

Mandy diligently working on the second bed!

Total time spent on this bed....12 hours! Total time spent on this rant...probably about the same! =)

The finished product!

So, IKEA, how do I apply for a refund of my weekend?

In preparation of visitors later this month, we have recently been looking and thinking about getting a new bed. Our old bed was a full-size (yes, for both of us!) I had bought first year of medical school...so...carry the one...8 years ago! It had definitely seen better days and mandy always insisted it tended to slope towards my side (an insinuation to which I still take offense!). But buying a new mattress is such an unpleasant proposition we have kept putting it off.

Like many major household purchases, it's so hard to really know if you'll like it before actually making the purchase!  Consumer Reports was of little help (they only tested 26 mattresses for goodness' sake!) except for two pearls of advice:

• One, go to the store and lie on the bed, and not just for thirty seconds, but for 15 minutes. 
• Two, comparison shopping isn't really possible because for each vendor, mattress companies will often rename the mattress, using different coverings, etc.  So shopping around for the best price is mostly a waste of time

Consumer Reports top rated mattress brands were Tempur-Pedic and Sleep Number beds, but average prices were $2465 and $1835, respectively.  Next in line...IKEA at $515!  Not too hard of a decision there, particularly since they're literally less than a mile away.

The line we ultimately chose was the Queen size Sultan Hansbo, which is a memory foam topped spring mattress.  It took a little while to choose a mattress as Mandy prefers the rock hard beds while I need my pillow-top, sinking-into-a-cloud, marshmallow style mattress. In retrospect, this ended up being the easiest part of our weekend.

Next step was selecting a bed frame, since now that we are adults, we are trying to move away from just throwing the mattress on the floor.  They have some very nice beds at IKEA, although unfortunately they have discontinued the Leksvik line (from which most of our other furniture draws). We chose the Hemnes bed mostly because it provided under-bed storage space but also a headboard (neither of us have ever had a headboard!). And at $199 for the Queen bed, how can you go wrong?

We would soon find out...

They're Grrrrrrrrrrout!

A few days ago, Mandy came to me with a inch or two long piece of thin white material that she found in the bathtub while taking a shower. Upon further inspection, we found that this piece had come from the joint of the bathtub and the wall-tile. And after even further inspection, we found that not only were these pieces of what we initially thought was caulking falling out, but that the joint was cracked the WHOLE way around the tub.

Now I'm no expert in bathroom construction, but I don't think six months is the expected lifespan of grouting/caulking considering that the tub and the tiling were both brand new.  So I thought to myself, "well, maybe it's grout...but who would put grout where the tub and the wall connect?!"

A quick google search later I found this piece on DIYlife.com, that advocates using tiling grout in the spaces one would usually use "tub and toilet" caulk, claiming "It's cheap, long-lasting, looks great, and is better at resisting discoloration due to mildew." But unless you actually read through the comments section, you would think it's a great idea!  (to think I actually learned something useful in a comments section!)  Turns out it's not.

The consensus among most contractors (from the previous article as well as on the forums of ContractorTalk.com) is that caulking should be used wherever two different materials meet (wood and tile, tile and metal, etc.) as the two materials will shrink and expand at different rates and this will end up cracking the grout.  Well, that certainly seems to be the case in our bathroom. Less than six months and we had cracks, small throughout all the grout at the joint with the bathtub.

So here's how to caulk a bathtub....(and some of the tips and catches I found)

1. Clean out all old caulking (if re-caulking) or grout.
• Grout should technically be removed with a grout saw (although I didnt!) to avoid damaging the tiles.
• Caulking can be removed with a 5 in 1 painter's tool, or they do sell caulking removal kits at Lowe's that have plastic scrapers.
2. Clean down all surfaces and allow to dry.
3. Fill bathtub with water
• Filling the tub exerts downward pressure so that when the caulk dries and the tub is emptied, the caulking will be compressed rather than caulking with an empty tub and the caulk being stretched when you use the tub)
• Wipe down the tub edge just to make sure it's dry!
4. Cut the tip of the silicon caulk tube at a 45 degree angle (or straight if that works better for your style)
• Caulking for areas exposed to water HAS to be silicon, regular all-purpose caulking is NOT waterproof. 
5. Using a caulking gun, apply a bead at one corner and continue along the length of the tub trying to exert constant pressure to keep the amount of caulking constant (definitely not as easy as it sounds!)
• If you've not done caulking before and aren't sure you'll be smooth and even at applying the caulking, painter's tape is a great idea to keep the edges even and the caulking from getting all over the place (and it does!)
6. Once caulking is laid down, use either a caulking smoothing tool (also sold at Lowe's) or a wet finger (water or mineral spirits) to smooth the caulking and press it gently into the joint.
• Have a roll of paper towels around. The first time you lay down caulking, you will invariably have too much in some places.  It's very useful to have something disposable to wipe the extra caulking on as it is VERY sticky.
• Make sure if you are using paint thinner or mineral spirits that they are compatible with your tiles/counters/whatever.  I had a MAJOR scare when there was some slight discoloration of our marble countertop in the bathroom, thankfully it is very mild and actually improved with time.

A good video summary (although they make it look quite a bit easier than it is) and some text-based instructions.

I did the bathtub and the second bathroom sink before remembering to take before pictures (you'd think I'd remember one of these times!) but I've got the master bathroom sink all cleaned out and ready to go so those pictures should be up shortly as well as the finished bathtub pics!